Make sure amplifier is off.

Locate the left and right speaker outputs on your amplifier. Using 14 AWG wire, connect with single or double banana plugs or bare speaker wire. To make the bare speaker wire connection to the speaker cabinet, unscrew the banana jack to expose a hole in the post.

Connect the positive side of the amplifier’s speaker output to the positive terminal of the speaker and the negative output to the negative speaker terminal. Repeat connections for both speakers.

Double-check all connections to make sure that no wires are touching or exposed.

Input your audio source to power amp’s input section.Turn the amplifier on and slowly increase the volume as you play back audio.